Epoxy
Injection
·
Full
depth repair of structural cracks in
concrete
to equal or better the original strength.
·
Repairs
intermittent or seasonal water leaks in concrete, such as parking
structures and tilt-up buildings.
·
Reduces
steel corrosion potential in concrete.
·
Rebonds
ceramic tile such as in hotels, shopping malls, amusement parks,
etc. with a minimum of disruption and is approved by the Ceramic
Tile Institute as a high performance alternative form of repair.
Water
Reactive Polyurethane Grouts
·
Water
cut-off of leaking basements, elevator pits, reservoirs, dams,
concrete vaults, tanks, and other types of below grade structures.
·
Soil
stabilization to increase load bearing capacity, minimizes
permeability of fine soils and other distressed substrates.
·
Flexible
Watertight Joints created even in moving structures and in the
presence of active leaking.
Chemical
Grouts
·
Water cut off of leaking basements, elevator pits,
reservoirs, dams, concrete vaults, tanks and other types of below
grade structures.
·
Soil
Stabilization to increase load bearing capacity of fine soils and
other distressed substrates.
·
Formation
of Water Impervious Walls.
·
Erosion Prevention
of load bearing sub-soil by flowing water.
·
Waterproof
leaking concrete block in retaining.
Integrated
Concrete Sealers
·
Clear
penetrating sealers of sodium and potassium silicates for:
·
Waterproofing
above and below grade from the positive or negative side.
·
Water Vapor
Reduction: Water vapor is a major cause of floor covering and/or
coating failure and is sometimes confused with the term
“Hydrostatic Pressure”.
·
Limits
penetration of gasoline, oil, acids, and caustics. Eases clean up and primes for paint. Also seals non-structural cracks.
·
Significantly
reduces efflorescence.
·
Reduces
steel corrosion potential in new and old concrete.
Underwater
Applications
·
Scuba
equipped divers for underwater leak detection, sophisticated
repairs. Underwater
inspection and evaluation.
Concrete
Surface Preparation
·
Shot
blasting, scarifying, scabbing, grinding, pressure washing and
sand blasting.
Slab
Jacking and Void Filling
·
Used in
lieu of tear out, removal and replacement of concrete.
Process incorporates the use of concrete pumps and
strategic placement of core holes to lift concrete slabs or to
fill voids associated with substrate subsidence or slab curing.
Topping
and Underlayment Installations
·
For
re-surfacing of concrete slabs to receive new floor covering,
epoxy coatings, or as wear surfaces.
Epoxy
Coating and Joint Sealants
·
Installations
for tanks, tunnels, vaults, reservoirs, waste water treatment
facilities, aquatic and marine environments.
Corrosion
Inhibitors
·
Add
mixtures to extend the service life of steel reinforced concrete
and repair materials in corrosive environments.
·
Migratory
corrosion inhibitors (MCI) for treatment of in place concrete to
mitigate the affects of corrosion such as cracking and spalling of
concrete, even in the presence of high levels of chlorides, such
as marine environments.
·
Other
corrosion inhibiting products such as epoxies, coatings, water
treatment, etc.
Consulting
Services
·
Analytical
investigation and testing of distressed concrete and related
problems.
·
Expert
analysis of other technical professional reports. Field investigation and on-site analysis.
We
invite inquires from qualified persons, engineers, architects,
etc.
Technical information and data are also available.
Please call or write for information.